Pro Clear Advantage units require virtually no maintenance and are designed for reliability and a long working life of approximately 7000 hours and only needs to be replaced once a year.

As an added benefit the unit is fitted with unique translucent hose tails, which glow when the UV lamp is working.

Spare parts and replacement lamps are always readily available.

• The units are manufactured and conform to BS EN 60598
• The units conform to the low voltage directive (safety) CEE 73 23.
• The units conform to the EMC directive CEE 89 336
• The units are CE approved

• Philips UV Lamps

Designed for large ponds, incorporating pressure filters or pressure circuits such as sand filters and venturis.

• Can be used for pressurised systems up to 56psi.

The Pro Pond UV110 has 2" solvent weld inlet and outlet ports and may be connected to either flexible or rigid plumbing using the appropriate plumbing fittings (not supplied). To ensure unrestricted flow, it is recommended that the unit is not plumbed in with anything less than 11/2" pipework.

Suitable for ponds up to 16,000 imp gallons/72,000 litres (dependent on stocking density and the amount of sunlight the pond is subject to) with a max flow rate of 8000 imp gallons/36,000 litres per hour.

• Individually chambered lamps for optimum efficiency and contact time.

Fused quartz glass sleeves which ensure that germicidal lamps are able to reach their optimum 'burn temperature' where the highest amount of UVc radiation is emitted. Also facilitates simple lamp replacement by keeping lamp separate from the pond water.

• Supplied complete with 5m cable and 4 wall mounting pipe clips.
• 930mm long x 320mm wide x 212mm high. Weight = 13.2kg.
  

• Philips UV Lamps